Door closers
Adjusted or replaced so the door shuts firmly without slamming.
Door repair
Closers, hinges, strikes and frames that stop sticking, slamming and failing.
The short answer
Most door problems come from four parts: the closer, the hinges, the strike and the frame. UTS Service repairs and replaces all of them on commercial, storefront and apartment building doors across the GTA, so the door closes, latches and locks every time.
What we do
Adjusted or replaced so the door shuts firmly without slamming.
Sagging doors rehung on hardware rated for the traffic.
Realigned so the door latches without a pull.
Bent or shifted frames corrected so the door sits square.
Exit devices repaired so people can always get out.
When a door is past repair, we replace it and its hardware.
When to call

How it works
Use the request form or call. A few details about the building and the doors is enough.
For anything beyond a simple fix, we walk the site and see the doors in person.
You'll know the price before we touch a door.
One crew handles the lock, the reader and the door, and shows you what was done.
Questions
A door that will not latch usually has a closer that needs adjusting, hinges that have sagged, or a strike plate that no longer lines up with the latch. All three can be fixed without replacing the door.
Repair it when the door itself is sound and the problem is hardware: closer, hinges, strike or lock. Replace it when the door or frame is bent, rusted through or cracked, because new hardware on a damaged door will fail again.
A door closer is the arm at the top of the door that pulls it shut at a controlled speed. Set properly, it closes and latches the door without slamming. A leaking or worn closer is the most common reason a door slams or stays open.
A fire-rated door only does its job when it closes and latches by itself. If it is propped open, or the closer or latch has failed, it should be repaired promptly.
Request service
Tell us about your building and we'll get back to you the same business day.